Why is the phonics screening check in Autumn?
For full details of how to administer the check, take a look at the DfE's Administering the phonics screening check guide.
In summary, the cancellation of the phonics screening check in June 2020 means that current year 2 pupils did not take the check in year 1. As such, the DfE requires schools to administer a past version of the phonics screening check to year 2 pupils in Autumn 2020. Any year 3 pupils who were due to take the check in June 2020 (when they were in year 2), are not required to take the autumn check.
Schools have the flexibility to decide when they administer the check within the second half
of the 2020 Autumn term (between the October half term and Christmas), and can administer the check to different students on different days as needed.
LAs must submit their schools’ check results to the DfE between 7 December 2020 and 22 January 2021, so you'll need to make sure you submit your data to your LA before 7 December 2020.
Setting up the assessment
To add the Phonics Check assessment, go to Students > Assessments > DfE Assessments.
Click the green Load Assessment Template button in the top-right of the page.
Select the Autumn 2020 Phonics Screening Check then click Load Template.
Click +Add in the Phonics Screening Check section select the right student group and date.
In the slide over, select the main year group that is doing the Phonics Screening Check. In a normal year, this is year 1. However, because the students who would have taken the check had it taken plave in summer are now in year 2, select year 2. Don't worry, you can add additional students from other years later on if needed.
Add the assessment date, and choose whether the assessment is for SEN students only, then click Setup Assessments.
To add additional students, click the check. Year 3 pupils, who were due to take the statutory check in June 2020 (when they were in year 2), are not formally required to take the autumn check, so there is no requirement to add them.
Then select Manage Assessment.
Click +Add in the Students section on the next page.
Select individual students or whole groups by clicking, then click Add Students.
Click the check, then click Input marks.
Schools are not required to submit outcomes to their LA unless a student was, for example, absent when the test was administered.
- Enter the students' test mark in the right-hand column.
- The left-hand column will then automatically be filled with Wt if below the pass mark or Wa if at the pass mark or above.
- Only input a different value in the left-hand column if the student did not take the test. In this case, input A, D, L or Q in the left-hand column, and leave the right-hand column blank.
Guidance for the codes to use, taken from page 14 of the DfE's Administering the phonics screening check guide.
Exporting the Phonics Screening Check to send to your LA
To export the results via CTF go to Students > Assessments > DfE Assessments > Export Results. Alternatively, you can go to School > Data > Export > Assessment Results.
Click +Add in the Current Assessment Results CTF Exports section and update the slide over with the data you want to export.
- Export Type - Choose which test you want to export. It is important to note that each CTF is titled Partial CTF because these files will only contain the assessment results and are therefore not as detailed as a students CTF.
- Destination - Here you need to choose whether the CTF will be sent to either the Local Authority or the Testing Agency.
- Year Group - Leave this field blank if you want to include all the students that took the test. If you want to only export year 2 Phonics Screening Check data, you would select Year 2 in this field.
- Include only students enrolled on - This section automatically chooses the current date however you might have a student that has un-enrolled since the test was done. Make sure that the date reflects the enrolment date that includes all students who sat the test.
When happy with the settings, click the green Export button.
The CTF will then show as processing. When the file status shows Ready for Download, click the file.
Click Download in the slide over.
Top Tip: You can locate your file once you have downloaded it by right-clicking the download at the bottom of your page. There's no need to open the file! In Windows, select the 'View in folder' option.