Adding or editing Roll Call times

In Arbor, statutory (also known as Roll Call) AM and PM attendance marks are derived based on the Roll Call times set up on your site. For more information on how the derivation works, please see the following article: What are Roll Calls and how are Roll Call marks calculated?

If you need to adjust your Roll Call Periods in Arbor, just head to Students > Attendance > Admin > Roll Call Setup and follow the steps below. Please note: You'll only be able to make adjustments between 2 pm and 5 pm.

Screenshot_2023-04-25_at_10.35.23.png

Changing the times of your existing Roll Call Periods

If you need to change your Roll Call times, we recommend adding a new roll call time rather than editing your existing one. This means the roll call times will only apply to registers from that date onwards and won't recalculate any past attendance.

You should only change your roll call times if you realise that there is an error in the start or end time of your currently active Roll Call Periods.

Click into the Roll Call Period that you'd like to adjust, then click Edit.

Screenshot_2023-04-25_at_10.37.23.png

Set the desired new Register opens time and Register closes time. Please be aware that this will cause a recalculation of all statutory marks in the date range that the Roll Call Time applies to, based on the new open and close time - some registers may no longer be considered when deriving statutory marks.

For example, if the time is changed from 08.00-09.30 to 08:45-09:15, a lesson running from 09.15-10.00 would no longer be considered in the calculation of statutory marks. 

Screenshot_2023-04-25_at_10.37.59.png

 

If there are any dates not covered by a roll call period, this will be flagged to you. You'll need to click into the roll call and click Edit to make sure all dates are covered.

missing_dates_from_roll_call.png

change_roll_call_dates.png

Adding a new Roll Call Period

In some cases, you might need to add a new Roll Call Period - for example, if morning registration was changing from 08:30-09:00 to 08:30-08:45, I may wish to add a new Roll Call Period that only covers 08:30-08:45 - preventing Period 1 from influencing the AM statutory mark for students.

To add a new Roll Call Period, click on either Add new AM Period or Add new PM Period.Screenshot_2023-04-25_at_10.35.23.png

 

Next, set the required Register opens time and Register closes time. You'll also need to set the Effective date to tell Arbor when the new Roll Call Period should become active (Arbor will automatically end the existing Roll Call Period on the day prior to the specified Effective date.

End date is only required if you know when the Roll Call Period will no longer be used.

Click Add Roll Call Time once you've added the required details.RollCall4.png

 

Once you've completed these steps, you'll then be able to see the new Roll Call Period in place. Any previously ongoing roll call times will be automatically ended on the last day before the new roll call times begin. Arbor will automatically start using the new period once the effective date arrives.

Screenshot_2023-04-25_at_10.39.03.png

 

If there are any dates not covered by a roll call period, this will be flagged to you. You'll need to click into the roll call and click Edit to make sure all dates are covered.

missing_dates_from_roll_call.png

change_roll_call_dates.png

 

Can we set up different roll call periods for different days?

It is not possible to set up different times for different days of the week.

You would manage the start times by setting different start times for the lesson timetable slots themselves: Changing the Start and End Times of registers and timetable slots in bulk

Can we set up different roll call periods for different students?

It is not currently possible to set up different roll call periods for different student groups. For a student's attendance to contribute towards their statutory attendance mark, a lesson must overlap with your school's roll call times. 

Was this article helpful?
2 out of 5 found this helpful
I'm still stuck!

Comments

0 comments

Article is closed for comments.